Description
1. Copper Fittings: Coupling, 90°Elbow, 45°Elbow, 180°Return bend, Reduce coupling, TEE, Cap, etc.
2. Brass Fittings: Elbow, Tee, Cross, Reducer, Adapter, etc.
3. Size: Customized.
Description
Main Menu
PreviousNext
1. Copper Fittings: Coupling, 90°Elbow, 45°Elbow, 180°Return bend, Reduce coupling, TEE, Cap, etc.
2. Brass Fittings: Elbow, Tee, Cross, Reducer, Adapter, etc.
3. Size: Customized.
About Copper Fitting & Brass Fitting
YK Copper is a leading Copper/Brass Fitting manufacturer and supplier.
Copper fittings are joints used to connect copper pipes. Copper fittings are divided by function: casing joints, reducing joints, 90°elbows, 45°elbows, tee joints, reducing tee joints, four-way joints, reducing four-way joints, and live joints ( Valve conversion is just joint), flange, and pipe clip. The connection method is divided into socket welding, threaded connection, flange connection, and new quick link. The material: is divided into copper, brass, and bronze. Divided by use: water pipe fittings, air conditioning pipe fittings, refrigeration pipe fittings.Copper fittings for residential, commercial plumbing, and HVAC systems.
Copper Fitting & Brass Fitting Features
Copper fittings for pipes and ACR systems have gone to the leading supplier of copper fittings in China. Readily available in both ASME B 16.22 and EN 1254-1 Requirement, our end feed fittings can be used in domestic, industrial, and HVAC systems. Copper Press Fitting is a flameless option for soldering copper pipe links. This system uses a hydraulic device to press specifically developed ports to sign up with conventional pipes. These ports house a securing aspect that, when pushed, produces an also and dependable link. Copper press fittings work with a variety of press devices and jaws. Unlike conventional brazing techniques, press fittings include no warm and no requirement to weld or solder joints and links. As one of the most essential copper pipe fitting types, copper press pipe fittings have quickly become the favored technique for signing up with copper tubes system quickly and cleanly.
YK Copper Sheet & Copper Plate
YK Copper can supply copper and brass fittings, e.g., end feed copper fittings, copper press fittings, solder ring copper fittings, ACR copper fittings, brass compression fittings, brass solder fittings, brass thread fittings, PEX fittings, etc.YK Copper has received various certifications for our products in many markets, such as WRAS, WATERMARK, KITEMARK, ANEOR, SABS, UPC, CUPC, NSF, and so on.
YK Copper is also continuously developing new kinds of Copper/Brass Fitting products. If you want to get our Copper/Brass Fitting’s latest price daily, please get in touch with us quotation within 10 hours.
Application of Copper Sheet & Plate
What Can Copper Sheet & Plate Do?
Copper/Brass Fitting For Air Pressure Pipe
Copper/Brass Fitting For Air Conditioning
Copper/Brass Fitting For Oil and Gas
Copper/Brass Fitting For Steam
Copper/Brass Fitting For Medical Gas
Copper/Brass Fitting For Plumbing
Copper/Brass Fitting For Aviation
Parameters of Copper Fittings
Part No. | Size | Part No. | Size |
113ST10-06 | 3/8″x1/4″ | 113ST28-19 | 1-1/8″x3/4″ |
113ST12-06 | 1/2*x1/4″ | 113ST28-25 | 1-1/8″x1″ |
113ST12-08 | 1/2*x5/16″ | 113ST35-16 | 1-3/8″*5/8” |
113ST16-06 | 5/8″x1/4″ | 113ST35-19 | 1-3/8*x3/4″ |
113ST16-08 | 5/8**5/16″ | 113ST35-25 | 1-3/8″x1″ |
113ST16-10 | 5/8″x3/8″ | 113ST35-28 | 1-3/8*x1-1/8″ |
113ST16-12 | 5/8″x1/2” | 113ST42-22 | 1-5/8*x7/8” |
113ST19-06 | 3/4″x1/4” | 113ST42-28 | 1-5/8*1-1/8″ |
113ST19-08 | 3/4″x5/16″ | 113ST42-35 | 1-5/8″X1-3/8″ |
113ST19-10 | 3/4″x3/8″ | 113ST54-28 | 2-1/8*>1-1/8″ |
113ST19-12 | 3/4″x1/2″ | 113ST54-35 | 2-1/8*x1-3/8″ |
113ST19-16 | 3/4″x5/8″ ! | 113ST54-42 | 2-1/8″x1-5/8″ |
113ST25-12 | 1″x1/2” | 113ST67-28 | 2-5/8*>1-1/8″ |
113ST25-16 | 1″x5/8″ | 113ST67-35 | 2-5/8*x1-3/8″ |
113ST25-19 | 1″x3/4″ | 113ST67-42 | 2-5/8*x1-5/8″ |
113ST28-16 | 1-1/8**5/8″ | 113ST67-54 | 2-5/8″>2-1/8″ |
Part No. | Size | L | Part No. | Size | L |
112ST06A | 1/4” | 24 | 112ST32A | 1-1/4″ | 84 |
112ST08A | 5/16” | 28 | 112ST35A | 1-3/8″ | 88 |
112ST 10A | 3/8” | 32 | 112ST38A | 1-1/2” | 96 |
112ST13A | 1/2” | 38 | 112ST42A | 1-5/8″ | 106 |
112ST16A | 5/8” | 46 | 112ST45A | 1-3/4″ | 116 |
112ST19A | 3/4” | 52 | 112ST54A | 2-1/8″ | 126 |
112ST22A | 7/8” | 60 | 112ST67A | 2-5/8” | 148 |
112ST25A | 1″ | 64 | 112ST76A | 3″ | 158 |
112ST28A | 1-1/8” | 72 | 112ST85A | 3-1/8″ | 166 |
You ask, we answer
YK Copper is committed to solving all your problems.
Here are the answers you need.
If not, please contact us to give you the best solution.
We’ll get back to you within 10 hours
Can a brass fitting crack?
The cracking of brass products is generally caused by stress corrosion cracking, which is the result of selective zinc corrosion between brass grains under residual tensile stress in cold working.Measure:(1) Fully carry out low-temperature stress relief annealing to eliminate the residual stress generated by brass products during cold working. After stress relief annealing, prevent brass products from being deformed or bruised by local processing.(2) When the strength permits, try to use brass materials with a low zinc content. Note that not only the chemical composition must be qualified, but also there should be no segregation.(3) Control the deformation degree of cold working to avoid uneven deformation.(4) Brass products should be stored away from corrosive atmospheres, especially near ammonia gas.
Will a brass fitting stop leaking?
When leakage occurs, one of the most typical methods to repair it is using brass compression fittings. These have consisted of a shutoff body, a ferrule (a round copper ring), and a nut that screws to the shutoff body, pressing the ferrule as it is tightened up.
Is brass fittings OK for water?
Brass-related electrical components are packaged or sealed, and the sliding parts have the corresponding grease, so the open-air elevator is not afraid of rain. Brass will react with oxygen, carbon dioxide, and water in the air for a long time in the humid air. Basic copper carbonate Cu2(OH)2CO3, a layer of green material, appears. It is because it is not easy to rust, and the interface is firm and does not easy to leak.
What are the different types of copper fittings?
Here are copper end feed fittings, copper press fittings, solder ring fittings, brass solder fittings, brass compression fittings, brass thread fittings, ACR copper fittings, and PEX fittings. According to the shape and functions, the copper fittings generally includes Copper Elbows, Copper Tee, Copper Coupling, Copper coupling reducer, Copper adapter, Copper Union, copper trap fittings, copper end caps, crimp ring, full Copper cross-over, Copper partial cross over, U bends, etc.
Why do we use copper fitting?
Excellent malleability: Brass has excellent malleability. The material is flexible and easily adjusted/twisted compared to steel or iron pipes. The material is easier to shape than other materials. Although brass is extremely malleable, it still retains its reliability and durability.Ultimate Durability: Brass is extremely durable due to its various working properties. If you are looking for fittings that will provide consistent performance for many years, brass pipe fittings are the answer. In addition, these brass fittings can also provide optimum performance in supply lines containing boiling water.Excellent versatility: Brass pipe fittings are available in various shapes, sizes, and widths. This makes them very versatile and suitable for various pipes in plumbing systems. Whether it’s a project with tight specifications or the plumbing in your home – brass fittings deliver high performance.High Corrosion Resistance: Metal joints can experience severe wear due to corrosion and rust. Brass is known to have excellent corrosion resistance, which makes it ideal for plumbing fittings. The non-corrosive nature of brass fittings is why they are preferred in areas with highly corrosive water.High-temperature resistance: Brass has a good conductive temperature. It can withstand higher temperatures compared to other materials. This makes it ideal for hot water distribution systems.
Get Latest Price Now
We Promise Quotaion Within 10 Hours.